OverDrive 1998-2013 Harley 6x9 Horn Component Kit for 5x7 Speaker Lids SKU: SPK-13-5x7-OverDrive



Free System Design Call Now 1(888)311-0016

This is an easy bolt-in solution that transforms wimpy factory Harley 5x7' speaker lids into a full format 6x9 pro audio kit with dual-stage OverDrive horn tweeters. If you are looking for the best of the best, you found it! Competition-level speaker package for factory 5x7" speaker lids.

Designed for Competition Baggers
We built this speaker system with an entirely different approach. The Velocity OverDrive speaker system emits much more sound for every watt of amplifier power and is designed to perform in a saddlebag. Unlike other high-efficiency speaker systems out there this set is able to make use of that high efficiency at high volume levels due to a longer throw suspension and voice coil. High efficiency is no good if the speaker flys apart under heavy demand. 

Built for Use With Additional Bag Woofers
The 13-5x7-OverDrive is our go-to speaker system whenever using additional woofers down in the bags. This is because we designed the R690 6x9 woofers to play well with other speakers in the same bag. This includes 8-inch and 10-inch subwoofers and mid-woofers. Not only is the bass response of the R690 woofers not affected by the presence of bag woofers, but the R690 also has the motor strength and suspension to push back on the added air pressure to produce even more output on the bottom end.

Pro Tune Kit Included!

This speaker kit includes a Pro Tuning kit. This dramatically simplifies tuning your Harley sound system by giving you an accurate visual display of what your sound system is doing in real time. See the video for more information.

The Pro Tune kit comes with
  • A test microphone with calibration file
  • A USB drive that is loaded with a test track for the microphone
  • A microphone selfie stick adapter to hold the microphone in the correct position


  • Compatible Year - 1998-2013
  • Compatible Model - CVO Lids on Street Glide, Road Glide, Ultra Glide, Electra Glide, Road King
  • Location - Lid
  • Additional Adapter Required - No 
  • Modification Required - Minor grinding
  • Plug & Play - No
  • Works with Electric Lid Locks - N/A

Installation Notes:
Requires some assembly. Speaker terminals are standard aftermarket and are not directly plug and play with factory speaker wiring. Made for use with aftermarket amplifiers. A digital sound processor in your system for tuning is highly recommended. The horns in this package are the best sounding horns out there but need to be equalized with a DSP to bring them down to the same level as all of the other speakers on the bike in order to get maximum performance.


2 Years (limited) or 3 years if installed by an authorized Velocity dealer


Water Resistant

Extreme Level Performance

Road Glide

Street Glide

  • Top Level Horn Loaded Speaker System
  • Loud Enough to Wake the Dead
  • Bass Heavy at Extreme Volume Levels
  • Plays Well With Bag Woofers, Including Subwoofers
  • 2 Ohm Speakers Double Your Available Amplifier Power (amplifier dependant)


  • Max Power 300 Watts Pair
  • Nominal Power 150 Watts Pair
  • Impedance 2 Ω
  • Freq. Response 60 Hz - 20 KHz
  • Sensitivity (2,83V/1m) 93 dB
  • Voice coil Ø 25 mm 0,984“
  • Voice coil height 11 mm 0,433“

What's Included

  • 1 Pair Velocity OverDrive Horn Loaded Component 6x9 Speaker Set
  • 1 Pair of Universal Velocity OverDrive Speaker Adapters for Factory 5x7 Lids
  • Stainless Speaker Mounting Hardware
  • Neoprene Speaker Gasket
  • Passive Crossover Networks
  • Tweeter Service Quick Disconnects and Wire Extensions
  • Pro Tune Kit!

What's Not Included

  • Speaker Lids Not Included