Harley Radio Interface - Equalizer - Rockford Fosgate DSR1

$299.99 $249.99

We Build Full Systems!

There are many more speakers, amplifiers, and kits to choose from than what you see here.

[powr-button id=862f40c3_1492653712433]

The Perfect Solution

High to low, equalizer, crossover, Bluetooth all in one plug and play unit. This kit uses the awesome new Rockford Fosgate DSR1 digital sound processor to seamlessly integrate aftermarket amplifiers and speakers with your factory or aftermarket Harley radio. 

Simple to Setup 

The setup is straightforward and done by smartphone (Bluetooth). We can even make your settings for you remotely at no extra cost!

Easy to Use 

Baby simple smartphone app controls all of the settings. No need to connect a computer.

No Need to Flash Your Bike!

The equalizer can account for whatever flash your bike currently has. The plug and play signal harness comes with load resistors built into it that dramatically improves the sound quality of your factory Harley radio.

Easy to Install 

This kit will work with any radio, factory or aftermarket. Optionally it even ships with plug and play signal adapters for any '14 or later Harley Davidson radio. The DSR1 also has RCA inputs as well for aftermarket radios.

Additional DSR1 specifications and features include:
• Frequency response: 20 - 20k +/- 0.5 dB
• 239 Bands of equalization for aftermarket tuning
• Adjustable crossovers with selectable slope and crossover type
• Crossover Frequency: 20 - 20k Hz
• Time Alignment of up to 10msec of delay on each channel
• Bluetooth 4.0 connectivity for convenient setup
• Interactive Tuning Interface Controlled via Android/ iOS App
• Optional PLC2 Level Controller with assignable functions
• Dimensions (L x W x H): 5.12 in. x 4.04 in. x 1.26 in.
• CE Compliant

Image result for DSR1 Processor

Click here for  a full review and explanation on the DSR1 processor.

'14 and up Harley Davidson front signal harness

Front Plug & Play Signal Harness for '14 and up Harleys Is Available with This Kit. 

This harness includes the connectors that plug into the factory radio to grab signal as well as two new plug & play speaker harnesses that go from your aftermarket amplifier back to the front speaker pods. 

Note: The front plug and play harness shown is an optional part that will not ship with this item unless it is selected as an add-on at checkout. 

Rear Plug & Play Signal Harness 

If you would like to keep or enable your factory fader control, you can optionally purchase the rear signal harness for $69. Note: If your bike came from the factory with only two speakers you will need to have the radio flashed for 4 speaker operation in order to use the rear signal harness.  

Rear Plug & Play Signal Harness for Ultra Models. 

Ultra models do not have rear signal available at the front of the bike. The rear signal is available though at the tour pack plug near the back of the bike. We make a special harness for these bikes that gives you a "T" harness that goes in line with the tour pack and gives you both signal and speaker outputs up at the front of the bike. This harness has a 7 business day build time before shipping