Harley 6x9 Cut-In Lid Kit with Velocity R690 & Diamond Audio M1SRT Horn Tweeter

$1,089.99



Snap Logo Lease for as low as $/week Learn More

Overview

Free System Design Call Now 1(888)311-0016

Now you can install a 6x9 cut-in lid kit with Diamond Audio bullet-style compression horn tweeters using the non-speaker lids you already have. We engineered the Velocity R690 6x9" woofer to work better in a saddlebag than any other 6x9. They play louder, deeper, and have a much higher output for every watt you feed them. Traditional 6x9 car audio type speakers do not work well in Harley saddlebags for a number of reasons. So we went a very different route and made speakers that work spectacularly in bags. We purposely engineered a pronounced bass response on the bottom end. This required a total redesign of the voice coil. We made it longer and we made the woofers suspension with more throw as well. We did this while keeping the moving mass low and the efficiency high (which wasn't easy to do). The end result was a speaker that has the high SPL output and bass response that we need on a bike in real-world situations.  

Built for Use With Additional Bag Woofers
The R690 6x9 is our go-to speaker whenever using additional woofers down in the bags. This is because we designed the R690 6x9 woofers to play well with other speakers in the same bag. This includes 8-inch and 10-inch subwoofers and mid-woofers. Not only is the bass response of the R690 woofers not affected by the presence of bag woofers, but the R690 also has the motor strength and suspension to push back on the added air pressure to produce even more output on the bottom end. 

Fitment

  • Compatible Year - 1998+
  • Compatible Model - Street Glide, Road Glide, Ultra Glide, Electra Glide, Road King
  • Location - Lid
  • Additional Adapter Required - No
  • Modification Required - Yes - cut lids
  • Plug & Play - No
  • Works with Electric Lid Locks - N/A

Installation Notes
Requires assembly. Speaker terminals are standard aftermarket and are not directly plug and play with factory speaker wiring. Made for use with aftermarket amplifiers. A digital sound processor in your system for tuning is highly recommended.

Warranty

2 Years (limited) or 3 years if installed by an authorized Velocity dealer

Features

Water Resistant

Extreme Level Performance

Road Glide

Street Glide

  • No Need to Buy New Lids or Deal With Paint
  • Optimized for Better Bass Response 
  • Carbon Fiber Cone
  • Extra Long Voice coil and Cone Excursion

Specifications

  • Max power 300 Watts Pair
  • Nominal power 150 Watts Pair
  • Impedance 2 Ω
  • Freq. Response 60 Hz - 20 KHz
  • Sensitivity (2,83V/1m) 93 dB
  • Magnet Ferrite Magnet size Ø x h 85 x 17 mm 3,35“x 0,67“
  • Total driver displacement 0,3 l 0,011 cf
  • Weight of one component 2,315 lb
  • Voice coil Ø 25 mm 0,984“
  • Voice coil height 11 mm 0,433“

What's Included

  • 1 Pair of Velocity Cut-In Lid Kits
  • 1 Pair of Velocity R690 6x9 woofers
  • 1 Pair of Diamond Audio M1SRT Compression Horn Tweeters
  • 1 Pair of Passive Crossover Networks
  • Neoprene Speaker Gasket
  • Stainless Steel Speaker Mounting Hardware