Jl Audio C1-650: 6.5-inch (165 mm) 2-Way Component Speaker System
5 Great reasons to buy from us:
Full Warranty from Authorized Retailer
100% Fitment Guaranteed
This Product Passes Our Performance & Quality Tests
American Hard Bag now offers easy financing through Snap! Finance.
Fast & Easy • No Credit Needed • 100-Day Cash Pay Off
We Build Full Systems!
There are many more speakers, amplifiers, and kits to choose from than what you see here.
C1-650: 2-Way Component System: 6.5-inch (165 mm) Woofer, 0.75-inch (19 mm) Aluminum Dome Tweeter
Fitment: This speaker set will fit all models of Harley touring bikes with a fairing from '98 to present day with no major modifications required. '13 and earlier bikes will require a 5.25" to 6.5" speaker adapter That can be found here. '14 & up batwing fairing bikes require a replacement speaker grill in order to make space between the speaker surround and the grill. You can find that grill here. '15 & up Road Glides do not require any special parts for the mid driver. The tweeter can be located in the grill of all models and years of Harley touring bikes. A 1.7" hole needs to be punched into the grill for the tweeter to mount into. We have grills available for all bikes with the tweeter hole already punched. Call for details 1(916) 823-5256.
C1 Speakers Deliver Real Substance and Great Audio Performance in a Format Designed for Easy Fit.
To facilitate fit, multi-application adaptor rings are included for the C1-650 woofers, allowing easy, drop-in installation compatible with oversized 6.5-inch and 6.75-inch speaker openings. Without the ring, the woofers will also fit into many "6-inch" speaker locations as well. Surface and flush mounts are included with C1 tweeters for maximum installation versatility.
C1 woofer drivers benefit from proprietary FEA modeling and JL Audio's expertise in low-frequency driver design. This knowledge is used to create speakers that can play loudly, while maintaining a smooth, dynamic, low distortion sound. At the core of the C1-650 is a proprietary, stamped, steel 6.50-inch (165 mm) frame and a DMA-optimized motor system. A mineral-filled, injection-molded polypropylene cone is suspended with a rubber surround on the front, and a carefully engineered flat Conex® spider at the top of the voice coil, to precisely control the voice coil's motion. Tinsel leads are carefully routed and attached to the spiders to prevent fatigue and buzzing. These are the same kinds of features and materials normally found on much more expensive loudspeakers.
Equipped with a true, edge-driven, aluminum dome tweeter, C1 speakers stand further apart from others in its category with superior high-frequency clarity and definition. The tweeter’s design has inherently excellent off-axis response and high-frequency extension. It also benefits from the damping of a silk surround suspension and Ferrofluid in the voice coil gap, along with the superior strength of a neodymium magnet circuit. An in-line, outboard 2nd order high-pass filter, with Advanced Tweeter Protection Circuitry, is included to further enhance smoothness and improve power handling.
When it comes to value, C1 is the real deal!
Sold as a pair. Grilles not available.
|Continuous Power Handling (RMS)||50 W|
|Peak Music Power||225 W|
|Recommended Amplifier Power (RMS)||10 - 75 W / Ch.|
|System Efficiency||91.0 dB @ 1 W / 1 m|
|System Nominal Impedance||4 Ω|
|System Frequency Response||59 Hz - 22 KHz ± 3 dB|
|Frame Outer Diameter* (A)||6.5 in / 165 mm|
|Grille Tray Outer Diameter (B)||6.84 in / 174 mm|
|Motor Outer Diameter (C)||3.15 in / 80 mm|
|Frontal Coaxial Tweeter Protrusion (D)||N/A|
|Frontal Grille Protrusion** (E)||0.85 in / 22 mm|
|Mounting Hole Diameter (F)||5.56 in / 141 mm|
|Mounting Depth (G)||2.44 in / 62 mm|
*Does not take into account mounting tabs
**Frontal grille protrusion measured from mounting surface
|Flush Mount Fixture Diameter (A1)||1.87 in / 48 mm|
|Surface Mount Fixture Diameter (A2)||1.69 in / 43 mm|
|Flush Mount Mounting Hole Diameter (B)||1.625 in / 41 mm|
|Flush Mount Mounting Depth (C)||0.76 in / 19 mm|
|Flush Mount Tweeter Frontal Protrusion (D1)||0.29 in / 7 mm|
|Surface Mount Tweeter Frontal Protrusion (D2)||0.92 in / 23 mm|
|Width (W)||1.96 in / 50 mm|
|Height (H)||0.90 in / 23 mm|
|Depth (D)||1.34 in / 34 mm|