Victory Cross Country ST35 Speaker Bridge

Victory Cross Country ST35 Speaker Bridge
This item should be used in conjunction with a rear mounted 5.25” to 6.5” speaker adapter. Use the supplied 1.25” 8-32 screws to fasten the ST35 bridge in front of the factory speaker pocket.
Warning! Be sure to use blue thread locker on the three Allen bolts that hold the
magnet onto the ST35 horn. These fasteners are only finger tight and have been known to come loose, allowing the magnet to fall off of the horn and destroy the mid driver behind it. Do not over tighten these bolts. They are not tight from the factory for a reason.