Victory Cross Country ST25 Speaker Bridge

Victory Cross Country ST25 Speaker Bridge

This item should be used in conjunction with a rear mounted 5.25” to 6.5” speaker adapter. Use the supplied 1.25” 8-32 screws to fasten the ST25 bridge in front of the factory speaker pocket. Use supplied lock nuts on the front side of the ST25 bridge to secure the entire assembly in place.

Warning!​ Be sure to use blue thread locker on the three Allen bolts that hold the
magnet onto the ST25 horn. These fasteners are only finger tight and have been known to come loose, allowing the magnet to fall off of the horn and destroy the mid driver behind it. Do not over tighten these bolts. They are not tight from the factory for a reason.