JL Audio MX500/4: 4 Ch. Class D Full-Range Amplifier, 500 W

$379.99

5 Great reasons to buy from us:

  • Image of Secure Ordering
    Secure Ordering
  • Image of Full Warranty from Authorized Retailer
    Full Warranty from Authorized Retailer
  • Image of 100% Fitment Guaranteed
    100% Fitment Guaranteed
  • Image of Easy Returns
    Easy Returns
  • Image of This Product Passes Our Performance & Quality Tests
    This Product Passes Our Performance & Quality Tests

American Hard Bag now offers easy financing through Snap! Finance.

Fast & Easy  No Credit Needed  100-Day Cash Pay Off 

We Build Full Systems!
There are many more speakers, amplifiers, and kits to choose from than what you see here.

[powr-button id=862f40c3_1492653712433]

MX500/4: 4-Channel Class D Full-Range Amplifier, 125 W x 4 @ 2 Ω / 70 W x 4 @ 4 Ω - 14.4V

Fitment Fitment: This amplifier easily fits in any Harley Davidson touring bike fairing of all years. We also make Bond-In amplifier mounting racks that are specific to this amplifier for mounting inside a saddlebag or a tour pack.


Engineered specifically for powersports applications, the 4-channel MX500/4 amplifier employs our high-speed NexD™ switching design to deliver plenty of clean power, without straining charging systems. Its tiny, cast aluminum chassis is highly resistant to corrosion, with an IPX7 water-resistance rating, making it perfect for motorcycles, ATV’s or other utility vehicles.

Generating a solid 70W x 4 into 4 ohms (14.4V, 1% THD), the MX500/4 is fully bridgeable, so it can be used as a 3-channel amplifier, or as a 2-channel amplifier producing a potent 250W x 2 into 4 ohms.

Other features include independent front and rear crossovers with selectable full-range, high-pass or low-pass filter controls and a dual-range input section that accepts a wide range of input voltage levels, from line-level all the way to high-power speaker level signals.

This amplifier features a black powder-coated finish, a gasketed cover for the controls and stainless steel hardware for durability.

Rated Continuous (RMS) Power @ 14.4 V:

@ 4 Ω 70 W RMS x 4
@ 2 Ω 125 W RMS x 4
Bridged @ 4Ω 250 W RMS x 2
Rated Continuous (RMS) Power @ 12.5 V:
@ 4 Ω 55 W RMS x 4
@ 2 Ω 90 W RMS x 4
Bridged @ 4Ω 180 W RMS x 2

 

General Specifications:

Frequency Response 20 Hz - 20 kHz (+0, -1dB)
S/N Ratio, referred to highest rated power >88 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)
S/N Ratio, referred to 1 W >70.5 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
Damping Factor @ 4 Ω >92 / 50 Hz
Damping Factor @ 2 Ω >43 / 50 Hz
THD+N @ Rated Power <1% @ 2 Ω per Ch.
Input Voltage Range @ RCA Inputs Switchable from 250 mV - 4 V RMS (Low) to 750 mV - 15 V RMS (High)
Min.Copper Power / Ground Wire Gauge 4 AWG wire
Fuse Rating 50 A (AFS, AGU or MaxiFuse™)

 

Signal Processing:

Filter Mode(s) Low-Pass or High-Pass
Filter Slope(s) 12 dB/octave
Filter Frequency Range 35 Hz - 300 Hz
Detented, Calibrated Filter Freq. Potentiometers Yes
Filter Defeat Function Yes
Remote Level Control No
Remote Level Modes N/A
Channel Input Mode Switch Yes (2/3/4 ch.)
Pass-Through Preamp Output None
Source Channel Selection for PreOuts N/A

 

Height (H) 1.77 in / 45 mm
Width (W) 9.33 in / 237 mm
Depth (D) 4.50 in / 115 mm