Diamond Micro4V2 Plug & Play Amplifier Kit for Harley Saddlebag

$249.99

We Build Full Systems!

There are many more speakers, amplifiers, and kits to choose from than what you see here.

[powr-button id=862f40c3_1492653712433]

Designed Specifically for Diamond Audio's Amazing Micro4v2 Amplifier.

This kit consists of a complete plug & play wire harness for mounting the amplifier in your Harley Davidson saddlebag, and optionally includes a powerful 4 channel Diamond Audio Micro4v2 amplifier.

  • No wire to wire connections need to be made!*
  • All necessary wire harnesses included.
  • Easy install 

This Kit Takes All of the Hassle and Clutter Out Of adding a Powerful Amplifier to Your Harley Bagger.

Big Power That Is Easy to Install

Why mess around with a bunch of connections, splicing, cutting, .etc when you can buy a high performance amplifier kit that is plug & play? This is the highest performance plug & play amplifier kit on the market today for Harley Baggers.

Pictured below is the Diamond Micro4V2 amplifier installed with only whats provided in the kit. All cables are already terminated with plug-in connectors specific to Diamond amplifiers. All cables are perfect length for installation in your bag.

Diamond Amplifier for Harley Saddlebag

Installation could not be simpler.

Each cable is clearly marked and terminated for you. All cables are loomed with premium black nylon braiding and heat shrink. The amplifier shown here was mounted and installed into this bag in about 15 minutes.

Whats Included in the Kit

  • Amplifier (optional)
  • Full Plug & Play Wire Harness . All Cables Are Included: Power, Ground, RCA (Both in the Bag and 4 Channels of 6 Ft RCA to the Radio), Remote Turn-On, Speaker Harnesses for Entire Bike, Battery Connections, Fuse Holders, Stainless Steel Wire Clamps, Extra Wire Loom.
  • Optional Amplifier Mounting Rack
  • Optional LED Light Kit

Installation Instructions

Each kit is bagged as individual parts. Each part bag has specific installation instructions for that particular component. Installation of this product is designed to accommodate both professionals as well as total novices.   

*Wire to wire connections are not necessary at the amplifier. Speaker connectors for your particular speakers will need to be crimped on. Remote Turn-On wire will need to be terminated at the radio using the supplied connector. Very easy to integrate with factory Harley Davidson radios but not plug and play with connectors at the radio. 

Installation instructions for the Bond-In amplifier mounting rack can be found here.

Speaker Configuration (Choose One)

The Diamond Micro4v2 is a 4 channel amplifier that can drive 2, 4, 6, or 8 speakers.This kit can be ordered configured for several different speaker arrangements.

Choose Your Speaker Arrangement

  1. One speaker in each bag and no speakers up front (2 speakers total).
  2. One speaker in each bag and a pair of speakers in the fairing (4 speakers total).
  3. One speaker in each bag and two speakers up front in the lower fairings (4 speakers total).
  4. Two speakers in each bag with no speakers in the fairing (4 speakers total).
  5. Two speakers in each bag with two speakers in the fairing (6 speakers total).
  6. Two speakers in each bag with two speakers in the lower fairings (6 speakers total)
  7. One speaker in each bag and two speakers in the lower fairings and two speakers in the upper fairing (6 speakers total)
  8. Two speakers in each bag and two speakers in the lower fairings and two speakers in the upper fairing (8 speakers total).

Tour pack speakers are not supported at this time.

 Call if you have any questions or need help choosing the correct option. 1(916) 295-6171

Quick Disconnects for bag wiring

Every kit comes with quick disconnects for all bag wiring. These connections will stand the test of time and are designed for operation in high humidity, high vibration, and extreme temperatures. Stainless steel wire clamps with stainless hardware is standard issue for every kit.

Harley Amplifier Harness

Fuse Holders Built In

Built In Fuse Holders

High Power Connectors

High Power Connectors

Stainless Wire Outlets

Stainless Wire Outlets

Optional Mounting Rack

Optionally you can choose to have a machined Bond-In acrylic rack added to your kit. The rack comes with a hard plastic mounting puck and a 5 minute epoxy. Simply bond the puck into place and your amp rack can be bolted to the puck and your amplifier to the rack. No new holes need to be drilled into your bag to mount the amp rack. This means that you can mount your amplifier to any flat surface in the bag. 

What Comes with the Amp Rack Mounting Kit
  • Machined Acrylic Mounting Plate
  • Machined Mounting puck
  • 5 Minuite Quick Cure Epoxy
  • 4 Allen Socket Head Amplifier Mounting Bolts
  • 6 counter sunk Stainless Rack Mounting Screws 

Optional Amp Rack Lighting

Add LED lighting to your amp rack for just $20. Colors available are Red, White, or Blue.

Harley LED Lighted Amplifier Rack

Amplifier Specifications 

  • RMS Power Rating:
    • Max Power: 600 W RMS
    • RMS Power (2Ω): 150W x 4
    • RMS Power (4Ω): 80W x 4
    • Bridged(mono 1Ω): N/A
    • Bridged(mono 2Ω): N/A
    • Bridged(mono 4Ω): 300 W x 2
  • Type
    • Topology: Full Range Class D
  • Power Supply
    • Power Supply: Full PWM
    • Power Supply Threshold: 10.0VDC-17.0VDC
    • Idle Current: (0.7A)
  • Distortion
    • THD 4(1KH@4Ω) : 0.5%
    • S/N Ratio(A weighted@1W): -85dBA
    • S/N Ratio(A weighted@FP): -101.1 dBA
  • Input Sensitivity
    • Low Input Level: 200mV-5.0V
    • Hight Input Level: N/A
  • Input Impedance
    • Low Input Level: 20 KΩ
    • AUX Input Level: 20 KΩ
  • Output Stage
    • Output Impedance: 0.018Ω
    • Damping Factor(50Hz@4Ω): >70
    • Bandwidth(-3dB): 10Hz-35 Hz
  • Crossover(-12dB/Oct)
    • Variable High-Pass: 25Hz-250Hz(front only)
    • Variable Low-Pass: 50Hz-200Hz
    • Variable Sub-Pass: N/A
  • Fuse Ratings
    • ATC: 40A
  • Dimensions
    • Lenght x Width x Height(Inches): 8.39" x 4.05" x 1.38"
    • Lenght x Width x Height(mm): 213.1 x 102.9 x 35

Warranty 

Amplifier: 1 Year limited

Wire Harness: 5 Year

Amplifier Mounting Rack: 5 Year

LED Light Kit: 5 Year

Download PDF Manual Amplifier Manual PDF

 





*Wire to wire connections are not necessary at the amplifier. Speaker connectors for your particular speakers will need to be crimped on. Remote Turn-On wire will need to be terminated at the radio using the supplied connector. Very easy to integrate with factory Harley Davidson radios but not plug and play with connectors at the radio. 

This item is built to order and ships in 5 business days.